Allen & Heath Xone 62 Dj Mixer
Product Description
FEATURES:
Allen & Heath Xone 62 Dj Mixer, 6 Dual Stereo Channels CH 1&2 have XLR Mic inputs and [TRS] stereo line level inputs, with ‘corrective’ EQ. CH 3-6 have stereo RCA RIAA turntable inputs and stereo RCA line level inputs, plus powerful 4 band ‘music’ EQ.
All channels have 3 colour bar meter and gain control, EQ on switch and 60mm fader. CH 3-6 have X-fade assign section.
Stereo Mix Outputs Balanced mix outputs on XLR with
level control, plus secondary RCA ‘music only’ outputs for recording.
A post fade [TRS] mono sum output is also provided. The mix signal is displayed on 12 segment 3 colour bar meters Auxiliary Send: All channels have a stereo auxiliary send which can be individually switched pre or post fade. There is also a post crossfader send to this stereo aux, so a program feed to a zone is possible. The outputs are [TRS] jacks 4 Band EQ Powerful 4 band EQ with ‘asymmetric’ characteristic on CH 3-6; +6dB boost to preserve headroom and -26dB cut for creative mixing. CH 1&2 have ‘corrective’ EQ for mic & line control.
EQ on switches are provided VCA Cross Fader Conductive plastic, high quality 45mm Penny & Giles fader with curve switchable to cut or dip. Channels 3-6 can be assigned to X left side or Y right side, with green / yellow led indication.
The fader is a VCA design, so wear and tear does not affect audio.
Drop-in replacements.
Pan trim control for imbalance Voltage Controlled Filters 2 filters [1 for each side of the x-fader] with choice of High Pass, Band Pass, Low Pass or multiples e.g. notch.
Resonance adjusts Q from ‘mild to wild’.
Sweep controls from 100Hz to 20kHz with blue led on switch Engineer / DJ's Toolbox High powered headphone output with level.
‘Music only’ Booth output on [TRS] jacks with level. 12 segment 3 colour bar metering displays mix or cue/monitor section.
Channel cue overrides the monitor selected in the phones [option for post-EQ on CH 3-6].
Split Cue sends cue signals to left and selected program to right.
Mute kills booth monitor output.
Booth Mono sum button for phase and compatibility check PSU High performance internal switched-mode power supply.
Universal mains input voltage Configuration Options
Internal links: individual channel aux sends to pre-EQ and CH 3-6 cue to post-EQ. 9 pin user connector (D-type female) for custom modifications and remotes (require competent installation or service personnel)
DJHardwares.com is not responsible for any typographical errors.
Pictures are
for illustration purposes only.
All manufacturer's names featured in this site are property
trademark of their respective owners.
